-
Проблем
Здравей те.
Проблема ми е следния свързвам сево машинките с приемника връзвам и спийда , и мотора (мотора е четков) , като движа сервата няма проблеми но когато подам газ на мотора сервата почват да откачат. А когато откача моторчето и пак подавам газ без мотора няма проблеми ?
-
Като начало защо не пробваш с кондензатори 47nFa.Двата ги запояваш клема-корпус,а третия между двете клеми на мотора. И приемника по-надалеч от четките и силовите кабели . Пробвай,дано да съм бил полезен!
-
Bastu,
Вземи ни опиши хардуера, щото са ни намаляли гадателските способности......:laughing:
....Серва ( колко и какви ), контролер ( какъв и колко ампера могат да се теглят от 5-те волта ), приемник, акумулатор.
-
Това с побърканите сервота се получава при ниски напрежения. Същия ефект го наблюдавах и аз преди ден-два. Сервотата се ошашкват и започват самопроизволно да се местят накъдето им хрумне. Явно батерията ти е калпава и кляка много под товар. Ефекта лесно се получава при захранване със стари NiMH или NiCd акумулатори или с обикновенни 1.5V батерии. Сложи LiPo и всичко ще се оправи.
-
Пробвах с кондензаторите нямаше ефект ще пробвам с батерията да я заредя отново ама те е оловен акомулатор не мисля ,че ще кляка мн ще си зема и по голям да видим дали ще се промени нещо .
-
Оловните акумулатори не са застраховани против "клякане". Само волтметър ( по добре осцилоскоп ) може да покаже дали кляка или не. Ти обаче твърдо НЕ искаш да ни кажеш какъв ти е хардуера..... :laughing:
-
2 Attachment(s)
Приемника ми е такъв но на 40 Мhz http://rchobbies.com.au/store/produc...ducts_id=22044
Спийда е такъв http://www.srbatteries.com/efspedct.htm
Сервата са тези http://rchobby-bg.com/index.php?main...roducts_id=607
Ползвам оловен акомулатор а предаватяля ми е Novapro II от някакво хели Приложение 1423
Мотора е руси това дългото в средата Приложение 1424
-
Кой от всичките модели контролери е твоя ? На сайта, който си дал са много модели.
Освен кондензаторите, които за задължителни за четковите моторетки, както по-горе ти казаха колегите, контролера в много случаи може да се окаже неправилно подбран - било то по отношение на пусковия или пиковия ток на двигателя, така и по отношение на тока, който 5 волтовия стабилизатор може да отдаде. От този ток зависи колко серва и какви могат да се подключат към контролера.
-
като този чержения е 6-10 NC JES 180
-
Ако не греша, модела ти е 060 - ( 6 - 8А, 4 - 8 NiCd/2 - 3 LiPo, 2 servos).
На първо четене, 5 волтовия стабилизатор е 0,5А. Максимално допустимия ток на контролера също е доста малък. Нямам представа от снимката колко ток тегли моторетката, но бих пробвал с друг контролер....примерно 12....18А.